咸宁附近想过夜电话联系

Motor as Fast door Starting and closing the power source to ensure the normal operation of the motor is the problem to be paid attention to when installing. Because the motor is directly connected to the circuit, if the connection is not correct or there is a short circuit, wrong line and other conditions, it is easy to cause damage to the motor or can not run normally. Today, I would like to introduce the installation method and steps of the fast door motor, hoping to bring some help to you.

 What should be paid attention to when installing the motor of the fast door?

Or three-phase motor can be divided into three-phase motor according to the specification. The power of different motors is different, and there are some differences in the installation. Since the motor belongs to electrical equipment, it is necessary to check whether the motor is affected by moisture or water after opening the outer package of the motor. It is recommended to use a megohmmeter to measure the insulation resistance of the motor, which should not be lower than 0.5 megohm. If it is lower, the motor should be dried to ensure that there will be no short circuit due to moisture after power on operation. It is also necessary to check the name brand of the corresponding motor, whether the data matching is effective, and understand the corresponding attributes of the motor.

For the main body of the motor, it is also necessary to manually test whether the rotor can rotate normally. During the test, pay attention to whether the electronic is stuck, abnormal sound, falling off, etc. If so, the motor needs to be disassembled to see if it is damaged internally during transportation. If there is particularly obvious abnormal noise, it is recommended to contact the relevant after-sales personnel for maintenance.

Finally, when installing the motor circuit of the fast door, it is necessary to distinguish the appearance of the motor wiring port. Different wiring ports correspond to different wiring modes. Taking three-phase motor as an example, the "Star" connection method should be used when the connection port is horizontal. When the connection port is vertical, "triangle" connection method is needed. Of course, these in the installation, there are corresponding detailed installation instructions, we do a good reference on it!


September 11, 2020

What are the advantages of the factory's fast door and what problems should be paid attention to when choosing?
Do you know all these ways of opening the fast door?

Last

Next

What problems should be paid attention to when installing the motor of the fast door?

As the power source of the motor, it is necessary to ensure that the motor is closed in normal operation. Because the motor is directly connected to the circuit, if the connection is not correct or there is a short circuit, wrong line and other conditions, it is easy to cause damage to the motor or can not run normally. Today, I would like to introduce the installation method and steps of the fast door motor, hoping to bring some help to you.

Add time: