咸宁附近想过夜电话联系

 

Analysis of the advantages and disadvantages of ceramic fiber cloth

         Ceramic fiber cloth is woven with ceramic fiber yarn, and the raw materials are ceramic fiber, viscose fiber, glass fiber, stainless steel wire, etc., which is open and transparent. So, why is there a big price difference? Feipford's old Fei will tell you:

         It turns out that there are a lot of options in the process of ceramic fiber cloth, which leads to great cost difference and natural price difference. So, what are the options? Listen to me

         First of all, when the wool is combined, the proportion of viscose fiber can be high or low, which will determine what? In terms of spinnability and ablation rate, the higher the blending ratio of viscose fiber - the better spinnability - the higher the production efficiency - the lower the labor cost, but on the contrary, with the increase of the proportion of viscose fiber, the ablation rate is also higher and higher. Is the ablation rate better or worse? Bad, of course! Ceramic fiber cloth is used for fire prevention and heat preservation. Its main effective component is ceramic fiber. High ablation rate means that the effective ingredient is less, and the cloth will become sparse in the process of use, so the effect of thermal insulation, fire protection and heat insulation will be naturally discounted.

         Secondly, the weft density of ceramic fiber cloth is different. What's the problem? Ceramic fiber yarn is roving. If the weft density difference is a few, you can't see any difference. However, a few saved yarns will reduce the material cost. On the contrary, due to the thinning of weft density, the effect of heat insulation and fireproof sealing is reduced.

         Third, the quality control of ceramic fiber yarn count. For example, the most common quality problem of ceramic fiber yarn is big belly yarn and monofilament. What structure will this cause? It is such a yarn after weaving into cloth in the place of monofilament gap, in the place of big belly yarn appear pimple! From the perspective of process standards, such defects are allowed, but it is required to be within a reasonable and acceptable range. However, to check this quality problem, we have to wind the yarn, that is, rewind it again and use manual fingers to smooth it over for inspection (sorry, because the ceramic fiber cloth belongs to low profit, the automatic inspection equipment has not yet appeared!) It is very labor-intensive, so many manufacturers do not check it in order to save this part of labor !

         Fourth, the inspection and repair of ceramic fiber cloth defects, even if the front quality control is very strict, there are still defects after weaving, so the inspector is required to inspect the fabric inspection machine a little bit in front of the light, what to do if the defects are found? Within the scope allowed by the standard, manual repair shall be carried out to eliminate defects; otherwise, it shall be regarded as waste. This procedure is both labor and waste materials. Naturally, many manufacturers will be exempted!

         That's just part of it, feipford ® Ceramic fiber cloth is strictly in accordance with the process standards, with low ablation rate, high density and few defects, and the natural cost will be high. However, fepfeld does not regret this because:

    To do fire prevention is to do conscience, to do insulation is to do merit, fepford ® Ceramic fiber cloth protects your belongings!

November 2, 2018

Smooth delivery of flexible fire proof cover exported to South Korea
Materials such as fepford fireproof cloth are continuously supplied to shipyard

Last

Next

Analysis of fiber ceramic cloth technology

Ceramic fiber cloth is woven with ceramic fiber yarn, and the raw materials are ceramic fiber, viscose fiber, glass fiber, stainless steel wire, etc., which is open and transparent. So, why is there a big price difference? Feipford's old Fei will tell you:

Add time: